Clock Spring eyes release of new product

09
Mar.

Corrosion Combat January 2018 Features Clock Spring’s CEO and President, Matthew Boucher

Safety standards have advanced, and worker deaths have trended downward, but job sites continue to be dangerous. Matthew Boucher, President and CEO of Clock Spring Company, explains in this article that while regulations have greatly improved worker fatality rates, guidelines and legislation can only go so far  to reduce fatalities and protect workers’ lives. For […]

READ MORE »
16
Feb.

Clock Spring Expert Tackles the Cost of Corrosion at PPIM 2018

New products mitigate lost revenue from corrosion (Houston) – Clock Spring Company, LP (Clock Spring), the world’s leading manufacturer of permanent and temporary composite pipeline and pipe work repair solutions, is sharing its expertise on corrosion and composite solutions at the 2018 Pipeline Pigging & Integrity Management (PPIM) Conference. Clock Spring Senior Sales Engineer Bart […]

READ MORE »
02
Feb.

Clock Spring Establishes Industry Stronghold with the Acquisition of Citadel Technologies

Combined offering provides comprehensive suite of composite repair solutions (Houston) – Clock Spring Company, Inc. (Clock Spring), the world’s leading manufacturer of permanent and temporary composite pipeline and pipe work repair solutions, today announced the acquisition of Citadel Technologies (Citadel) of Tulsa, OK, a prominent manufacturer of engineered, carbon-fiber composite repairs for 20 years. “Clock […]

READ MORE »
08
Jan.

Offshore Magazine: Offshore repairs prove viability of composites

BY BUDDY POWERS & ANDREW PATRICK, CLOCK SPRING Composite technologies are changing the way corrosion repairs are carried out on offshore assets. Though there has been slow adoption of this technology in the oil and gas industry, it is a proven alternative that merits further examination. Composites have been used to repair a range of [...]

READ MORE »
08
Dec.

World Pipelines: A Permanent Solution

MATT BOUCHER, CLOCK SPRING, USA, DETAILS A SOLUTION FOR PIPELINE PROTECTION AT SUPPORT AND HANGER LOCATIONS, WHICH CAN PREVENT PIPELINE CORROSION AND REDUCE INSPECTION COSTS. Terminals, plants, transmission pipelines and refineries require a wide range of pipe support configuration to protect pipelines from environmental factors and to meet government regulations on atmospheric corrosion.  Pipelines are [...]

READ MORE »
03
Oct.

Continued Service With Composite Repairs

Continued Service With Composite Repairs When engineers set out to define specifications 20 years ago for offshore units that were expected to stay on site for 20 to 25 years, it was not uncommon to take a very conservative approach. That conservatism is reflected in the many assets that are reaching the end of their [...]

READ MORE »
27
Jun.

Pipeline & Gas Journal: Composite Sleeves Address Mechanical Damage to Pipelines

Pipeline operators work hard to ensure their pipelines are protected from external corrosion. However, it can be more challenging for operators to keep their pipelines safe from third-party interference. While pipelines are buried, well-marked, and permission is meant to be obtained before digging near a pipeline, in some cases a third party will cause mechanical [...]

READ MORE »
16
Jun.

Pipelines International: A new look for a well-known brand

Clock Spring has had a big start to 2017. Not only has the company instituted a brand new corporate image, which included a series of executive appointments, but it also announced at PPIM 2017 that it was working on it's first product since 2008. Following a marketing revamp and the relaunch of its 25-year-old brand, [...]

READ MORE »
12
Jun.

Does your pipeline composite repair look like this after 10 years?

A major North African based transmission pipeline operator recently excavated a section of 42’’ high pressure gas transmission pipeline. Locating the repair in the middle of the desert was a simple and quick operation due to the marker band performance and GPS within the ILI.  Check out the customer's photos of a Clock Spring composite repair [...]

READ MORE »
06
Apr.

Clock Spring eyes release of new product

Following a marketing revamp and the relaunch of its 25-year-old brand, Clock Spring has signalled it will be launching a new product in the next 12 months. President and CEO Matt Boucher, who spoke to Pipelines International at PPIM 2017 in Houston, Texas last month, said the manufacturer of composite sleeves for pipeline repair planned [...]

READ MORE »

HAVE A QUESTION OR NEED MORE INFORMATION? GET IN TOUCH.



Clock Spring has offices around the world with our global headquarters in Houston, TX, USA.

Have a question or need more information? Give us a call or fill in the form, and one of our representatives will reach out to you soon.

North America (USA)
621 Lockhaven Drive
Houston, TX 77073
P: +1-281-590-8491
F: +1-281-590-9528
England
4A The Causeway
Cambs, England
P: +44-1480-414-703
F: +44-1480-414-705
Scotland
54 Victoria Road
Aberdeen, Scotland
AB11 6FJ
P: +44 7985 396313
United Arab Emirates
P: +44-1480-414-703
F: +44-1480-414-705

Speak with an expert

Fields with * are required








Inquiry Reason:
Market Segment:
How Can We Help?*: